AAOK

All tanks come with a bare metal finish, and have been pressure tested.

USED ON: Sportsters

These tanks are offered in different widths to hold between 3.8 and 4.4 gallons of gas, and each one includes a Paughco #747-2 threaded hose line fitting for the vent bung on the bottom of the tank.

These tanks are offered in different widths to hold between 4.0 and 4.5 gallons of gas, and each one includes a Paughco #747-2 threaded hose line fitting for the vent bung on the bottom of the tank.

These tanks are offered in different widths to hold between 3.5 and 4.8 gallons of gas, and each one includes a Paughco #747-2 threaded hose line fitting for the vent bung on the bottom of the tank.

These tanks are offered in different widths to hold between 3.4 and 4.6 gallons of gas, and each one includes a Paughco #747-2 threaded hose line fitting for the vent bung on the bottom of the tank.

These universal tanks are designed to fit on modern customs with longer stretches in the top tubes, and are constructed with vents and screw-in fillers.

Replacement Mounting Kits for Standard and Stretched Coffin Tanks

Universal tanks designed to fit on modern customs with longer stretches in the top tubes, and constructed with vents and screw-in fillers.

Universal tanks designed to fit on modern customs with longer stretches in the top tubes, and constructed with vents and screw-in fillers.

Gas Cap and Replacement Mounting Kits - For Standard and Stretched Coffin Tanks

Fits most HD models thru 1967

These 3-gallon tanks feature a high-tunnel for a custom Fat Bob look, and have early cam-style gas cap bungs. Both tanks also have internally threaded bungs on the left-side for standard 3/8" NPT aftermarket or HD petcocks.

These 2.2-gallon tanks feature a low tunnel with two choices of front mounting tabs. They have early cam-style gas cap bungs, and internally threaded bungs on both sides for aftermarket 1/4" petcocks.

They have early cam-style gas cap bungs, and internally threaded bungs on both sides for aftermarket 1/4" petcocks.

These 3-gallon tanks feature a low tunnel with two choices of front mounting tabs, and early cam-style gas cap bungs. The tanks with straight mounting tabs have two internally threaded bungs for aftermarket 1/4" petcocks, and
the tanks with the ‘Horseshoe’ front tab have one internally threaded bung for a 3/8" NPT aftermarket or HD petcock on the left-side.

These tanks feature a low tunnel with ‘Horseshoe’ front mounting tabs, and come in two different capacities. They have early cam-style gas cap bungs, and internally threaded bungs on both sides for aftermarket 1/4" petcocks.

All tanks come with a bare metal finish, and have been pressure tested.

All tanks have a 22mm externally threaded bung for aftermarket or HD petcocks installed on the left-side of the tanks, come with a bare metal finish, and have been pressure tested.

All tanks come with a bare metal finish, and have been pressure tested.

All tanks come with a bare metal finish, and have been pressure tested.

All tanks come with a bare metal finish, and have been pressure tested.

All tanks come with a bare metal finish, and have been pressure tested.

All tanks come with a bare metal finish, and have been pressure tested.

These tanks will accept 22mm aftermarket or stock HD petcocks, and they come with a bare metal finish, and have been pressure tested.
 

They come with a bare metal finish, and have been pressure tested.

They come with a bare metal finish, and have been pressure tested.

They attach to the stock frame mounting points on all Sportsters with carburetors from 2004 thru 2006.

Tank bung – screw type (sold each)

Now available! All of the parts we use in-house, to build our legendary custom tanks.

They come with a bare metal finish, and have been pressure tested.

Comes with a bare metal finish, and has been pressure tested.

The tanks can be used for all fuel, or half oil and half fuel, and are made from 16-gauge steel to hold approximately 3.5-gallons of fuel.

Comes with a bare metal finish, and has been pressure tested.

Everything you need, except paint, to complete your gas tank installation.

Everything you need to complete your oil tank installation.

These mounts are used to install ‘flatside’ gas tanks on 1985–1986 4-speed FX models, and 1984–1999 Softails. They can also be used in universal applications. Replaces OEMs 11447 and 5775.

Available with either short thin or wide knurling on the edges, they’re exact copies of the stock caps used on Big Twins in the late 30’s.

These oil tanks measure 7"-tall x 85/8"-deep x 10"-wide, and the battery compartment is 53/8"-wide x 53/8"-deep.

These oil tanks measure 7"-tall x 85/8"-deep x 10"-wide, and the battery compartment is 53/8"-wide x 53/8"-deep.

Same as #749 but fits Paughco #’s 746T, 746TF, 748T and 748TF oil tanks

Measures 55/8"-tall x 85/8"-deep x 10"-wide. Battery plate is welded in place, and the compartment measures 53/8"-wide x 53/8"-deep.

The tanks measure 55/8"-tall x 85/8"-deep x 12¼"-wide, and the battery compartment is 7½"-wide x 51/8"-deep.

The tanks measure 55/8"-tall x 85/8"-deep x 12¼"-wide, and the battery compartment is 7½"-wide x 51/8"-deep.

Each tank includes a two-piece front bracket for easy installation, and measures 59/16"-tall x 7½"-deep x 12"-wide. The battery compartment is 73/8"-wide x 41/8"-deep.

Each tank includes a filler cap.

They measure 51/8"-tall x 85/8"-deep x 12¼"-wide, and the battery compartment is 7¾"-wide x 5¼"-deep.

Choose from three different oil tanks with 4-quart or 5-quart capacities.

For 3-Quart Oil Tanks for Softail and Paughco Frames

Fit 1986–1999 stock-width HD Softail and Paughco ‘Easyride’ frames. For ‘Winged’ 3-Quart Oil Tanks for Evolution Softail and Paughco Frames.

Fit 2000-up stock-width HD Softail frames, and Paughco ‘Easyride’ frames for Twin Cam ‘B’ engines. They work with the stock HD oil lines. For 'Winged’ 3-Quart Oil Tanks for Twin Cam Softails.

Fits  2000–up Twin Cam engines in Paughco ‘Easyride’ frames, or custom
applications with rubber oil lines. For 3-Quart Oil Tanks for Paughco Twin Cam ‘Easyride. Will NOT work with stock HD hard lines.

Fits Paughco rubber mount frames when using FXR or Touring model transmissions. For 3-Quart Oil Tank for Paughco ‘Rubber Mount’ Fram. Uses a Paughco #747 drain plug (sold separately). For proper mounting, please also order a Paughco #749A1 mounting bracket.

Available with or without a spin on filter. Uses standard NPT hose fittings.

Uses standard NPT hose fittings.

Everything you need to complete your oil tank installation.

Sold each.

Includes the tray, the top cover and the strap.

Many of the key components for early custom rigid or stock HD swingarm frames.

For 2004-up frames